This search combines search strings from the content search (i.e. "Full Text", "Author", "Title", "Abstract", or "Keywords") with "Article Type" and "Publication Date Range" using the AND operator.
Beilstein J. Nanotechnol. 2012, 3, 703–711, doi:10.3762/bjnano.3.80
Figure 1: SEM image of the Au electrodes; the gap between the two segments, distinguishable by the border of ...
Figure 2: (a) Red: Light-induced signal of a gold electrode under illumination (see Figure 1) in an electrochemical e...
Figure 3: Spatial dependence of the light-induced signal (see Figure 2a) for the two working electrodes. The probed ar...
Figure 4: Cyclic voltammogram of AgNO3 under illumination. Twelve insets of zoomed areas at different potenti...
Figure 5: Cyclic voltammogram (CV) of AgNO3 at 35 °C (black) and 45 °C (red), scan rate was 50 mV/s. The temp...
Figure 6: (a) Optical microscope picture of a MCBJ before electrochemical deposition of Ag (bright-field illu...
Figure 7: (a) Light-induced signal (red) of a dry, electrochemically closed break junction, and the laser pul...
Figure 8: (a) Illustration of the closed contact; a silver crystallite spans the bridge across the gap betwee...
Figure 9: (a) Voltage change during the laser pulse at an Au–Ag–Au junction versus time for different bias cu...
Figure 10: Sketch of the optical setup used for the experiments on the “dry” contacts.
Figure 11: Sketch of the electronic circuit used for the measurements on the electrochemically controlled cont...
Figure 12: Sketch of the electrical circuit used for the measurements on the “dry” contacts.
Figure 13: Diagram of an electrochemical cell used for studying the influence of laser illumination on the cha...